AZDOME 3-Lead ACC Hardwire Kit for M550(Pro)/M01 Pro/M17 Dash Cam

The AZDOME 3-Lead Hardwire Kit is a power management device that provides continuous power to your dashcam from your car's battery via the fuse box. This allows the dashcam to utilize the 24-hour Parking Monitor feature even after your engine is turned off. The kit automatically detects whether your vehicle is running on DC 12V or 24V and is compatible with most dash cameras on the market that have a mini USB power connector.

The Hardwire Kit monitors your voltage status and will cut off power to the dashcam if the voltage drops below the configured value for more than 8 seconds. This ensures there is enough power left to start your car the next time. You can choose from four different low-voltage protection settings, depending on whether your battery is 12V or 24V. We recommend starting with the highest setting and then testing and adjusting to find the optimal voltage threshold that will leave sufficient battery power to start your car.

The kit also provides reverse connect protection, short circuit protection, overload protection, and overtemperature protection (up to 130°C, returning to normal when it drops to 90°C). The total cable length is 3.5 meters, with 0.8 meters for the input and 2.7 meters for the output, terminating in a right-angled mini USB plug that can deliver up to 5V, 2.5A.

To install the Hardwire Kit, you need to connect three wires: the red wire (BAT+) to a constant fuse for power even when the vehicle is off, the yellow wire (ACC) to the fuse box ACC to allow the dashcam to power on and off with the vehicle, and the black wire (GND) to a metal bolt or screw for grounding.

Note that the Parking Mode only works on dashcams that have the function of detecting the ACC signal. This will enable your camera to record based on its parking mode settings. Also, be sure to avoid fuses that control important safety features like airbags or stability control when selecting the power source.

The AZDOME M550 dashcam is built with a super capacitor instead of a battery, so it must be powered by connecting it to your car in one of three ways: directly to a fuse, a cigarette lighter adapter, or an OBD cable. If you want to use the parking mode, you'll need to purchase the Hardwire Kit and ensure the output current is at least 5V/2.5A.

Overall, the AZDOME 3-Lead Hardwire Kit provides a convenient and reliable solution for powering your dashcam while protecting your vehicle's battery. It's backed by a 1-year warranty and 24/7 customer support. However, it's important to note that the kit is not compatible with certain Ford trucks and vehicles.

product information: